粉嫩高清一区二区三区精品视频,精品九九九,国产XXX69麻豆国语对白,国产调教

雙極性晶體管

二極管

ESD保護、TVS、濾波和信號調節ESD保護

MOSFET

氮化鎵場效應晶體管(GaN FET)

絕緣柵雙極晶體管(IGBTs)

模擬和邏輯IC

汽車應用認證產品(AEC-Q100/Q101)

74AUP1G126GF

Low-power buffer/line driver; 3-state

The 74AUP1G126 provides a single non-inverting buffer/line driver with 3-state output. The 3?-?state output is controlled by the output enable input (OE). A LOW level at pin OE causes the output to assume a high-impedance OFF-state. This device has the input-disable feature, which allows floating input signals. The inputs are disabled when the output enable input OE is LOW.

Schmitt-trigger action at all inputs makes the circuit tolerant to slower input rise and fall times across the entire VCC range from 0.8 V to 3.6 V. This device ensures a very low static and dynamic power consumption across the entire VCC range from 0.8 V to 3.6 V.

This device is fully specified for partial power-down applications using IOFF. The IOFF circuitry disables the output, preventing a damaging backflow current through the device when it is powered down.

此產品已停產

Features and benefits

  • Wide supply voltage range from 0.8 V to 3.6 V

  • High noise immunity

  • Complies with JEDEC standards:

    • JESD8-12 (0.8 V to 1.3 V)

    • JESD8-11 (0.9 V to 1.65 V)

    • JESD8-7 (1.2 V to 1.95 V)

    • JESD8-5 (1.8 V to 2.7 V)

    • JESD8-B (2.7 V to 3.6 V)

  • Low static power consumption; ICC = 0.9 μA (maximum)

  • Latch-up performance exceeds 100 mA per JESD 78 Class II

  • Inputs accept voltages up to 3.6 V

  • Low noise overshoot and undershoot < 10 % of VCC

  • Input-disable feature allows floating input conditions

  • IOFF circuitry provides partial power-down mode operation

  • ESD protection:

    • HBM: ANSI/ESDA/JEDEC JS-001 class 3A exceeds 5000 V

    • CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

  • Multiple package options

  • Specified from -40 °C to +85 °C and -40 °C to +125 °C

參數類型

型號 Package name
74AUP1G126GF XSON6

PCB Symbol, Footprint and 3D Model

Model Name 描述

封裝

下表中的所有產品型號均已停產 。

型號 可訂購的器件編號，（訂購碼(12NC)） 狀態 標示 封裝 外形圖 回流焊/波峰焊 包裝
74AUP1G126GF 74AUP1G126GF,132
(935281145132)		 Obsolete pN SOT891
XSON6
(SOT891) 		SOT891 REFLOW_BG-BD-1
SOT891_132

環境信息

下表中的所有產品型號均已停產 。

型號 可訂購的器件編號 化學成分 RoHS RHF指示符
74AUP1G126GF 74AUP1G126GF,132 74AUP1G126GF rohs rhf rhf
品質及可靠性免責聲明

文檔 (12)

文件名稱 標題 類型 日期
74AUP1G126 Low-power buffer/line driver; 3-state Data sheet 2023-07-14
AN10161 PicoGate Logic footprints Application note 2002-10-29
AN11052 Pin FMEA for AUP family Application note 2019-01-09
Nexperia_document_guide_MiniLogic_MicroPak_201808 MicroPak leadless logic portfolio guide Brochure 2018-09-03
SOT891 3D model for products with SOT891 package Design support 2019-10-03
aup1g126 74AUP1G126 IBIS model IBIS model 2014-12-14
Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904 Nexperia_document_leaflet_Logic_AUP_technology_portfolio_201904 Leaflet 2019-04-12
Nexperia_package_poster Nexperia package poster Leaflet 2020-05-15
DFN1010-6_SOT891_mk plastic, extremely thin small outline package; 6 terminals; 0.55 mm pitch; 1 mm x 1 mm x 0.5 mm body Marcom graphics 2017-01-28
SOT891 plastic, leadless extremely thin small outline package; 6 terminals; 0.35 mm pitch; 1 mm x 1 mm x 0.5 mm body Package information 2020-04-21
REFLOW_BG-BD-1 Reflow soldering profile Reflow soldering 2021-04-06
MAR_SOT891 MAR_SOT891 Topmark Top marking 2013-06-03

支持

如果您需要設計/技術支持，請告知我們并填寫 應答表 我們會盡快回復您。

模型

文件名稱 標題 類型 日期
aup1g126 74AUP1G126 IBIS model IBIS model 2014-12-14
SOT891 3D model for products with SOT891 package Design support 2019-10-03

PCB Symbol, Footprint and 3D Model

Model Name 描述

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.