74AVC1T45GM-Q100

Dual-supply voltage level translator/transceiver; 3-state

Automotive qualified

The 74AVC1T45-Q100 is a single bit, dual supply transceiver with 3-state output that enables bidirectional level translation. It features two 1-bit input-output ports (A and B), a direction control input (DIR) and dual supply pins (V_CC(A) and V_CC(B)). Both V_CC(A) and V_CC(B) can be supplied at any voltage between 0.8 V and 3.6 V making the device suitable for translating between any of the low voltage nodes (0.8 V, 1.2 V, 1.5 V, 1.8 V, 2.5 V and 3.3 V). Pins A and DIR are referenced to V_CC(A) and pin B is referenced to V_CC(B). A HIGH on DIR allows transmission from A to B and a LOW on DIR allows transmission from B to A.

The device is fully specified for partial power-down applications using I_OFF. The I_OFF circuitry disables the output, preventing any damaging backflow current through the device when it is powered down. In suspend mode when either V_CC(A) or V_CC(B) are at GND level, both A and B are in the high-impedance OFF-state.

This product has been qualified to the Automotive Electronics Council (AEC) standard Q100 (Grade 1) and is suitable for use in automotive applications.

Features and benefits

Automotive product qualification in accordance with AEC-Q100 (Grade 1)
- Specified from -40 °C to +85 °C and from -40 °C to +125 °C
Wide supply voltage range:
- V_CC(A): 0.8 V to 3.6 V
- V_CC(B): 0.8 V to 3.6 V
High noise immunity
CMOS low power dissipation
Complies with JEDEC standards:
- JESD8-12 (0.8 V to 1.3 V)
- JESD8-11( 0.9 V to 1.65 V)
- JESD8-7 (1.65 V to 1.95 V)
- JESD8-5 (2.3 V to 2.7 V)
- JESD8C (2.7 V to 3.6 V)
Maximum data rates:
- 500 Mbit/s (1.8 V to 3.3 V translation)
- 320 Mbit/s (< 1.8 V to 3.3 V translation)
- 320 Mbit/s (translate to 2.5 V or 1.8 V)
- 280 Mbit/s (translate to 1.5 V)
- 240 Mbit/s (translate to 1.2 V)
Suspend mode
Latch-up performance exceeds 100 mA per JESD 78 Class II
Overvoltage tolerant inputs to 3.6 V
Dynamically controlled outputs
Low noise overshoot and undershoot < 10 % of V_CC
I_OFF circuitry provides partial Power-down mode operation
ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 3B exceeds 8000 V
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V

參數類型

型號	V_CC(A) (V)	V_CC(B) (V)	Logic switching levels	Output drive capability (mA)	t_pd (ns)	Nr of bits	Power dissipation considerations	T_amb (°C)	Package name
74AVC1T45GM-Q100	0.8?-?3.6	0.8?-?3.6	CMOS/LVTTL	± 12	2.1	1	very low	-40~125	XSON6

PCB Symbol, Footprint and 3D Model

Model Name	描述

封裝

型號	可訂購的器件編號，（訂購碼(12NC)）	狀態	標示	封裝	外形圖	回流焊/波峰焊	包裝
74AVC1T45GM-Q100	74AVC1T45GM-Q100H (935299489125)	Active	B5	XSON6 (SOT886)	SOT886	REFLOW_BG-BD-1	SOT886_125

環境信息

型號	可訂購的器件編號	化學成分	RoHS	RHF指示符
74AVC1T45GM-Q100	74AVC1T45GM-Q100H	74AVC1T45GM-Q100

品質及可靠性免責聲明

Series

文檔 (16)

文件名稱	標題	類型	日期
74AVC1T45_Q100	Dual-supply voltage level translator/transceiver; 3-state	Data sheet	2024-07-02
AN10161	PicoGate Logic footprints	Application note	2002-10-29
AN90007	Pin FMEA for AVC family	Application note	2018-11-30
Nexperia_document_guide_MiniLogic_MicroPak_201808	MicroPak leadless logic portfolio guide	Brochure	2018-09-03
SOT886	3D model for products with SOT886 package	Design support	2019-10-03
avc1t45	74AVC1T45 IBIS model	IBIS model	2016-02-24
Nexperia_document_leaflet_Logic_Automotive_MicroPak_solutions_201904	Automotive logic in MicroPak leadless packages	Leaflet	2019-04-18
Nexperia_package_poster	Nexperia package poster	Leaflet	2020-05-15
sot886_3d_logo	sot886 3D logo	Logo	2018-09-19
DFN1410-6_SOT886_mk	plastic, extremely thin small outline package; no leads; 6 terminals; 0.6 mm pitch; 1 mm x 1.45 mm x 0.5 mm body	Marcom graphics	2017-01-28
XSON6_SOT886_mk	plastic, extremely thin small outline package; no leads; 6 terminals; 0.6 mm pitch; 1 mm x 1.45 mm x 0.5 mm body	Marcom graphics	2017-01-28
SOT886	plastic, leadless extremely thin small outline package; 6 terminals; 0.5 mm pitch; 1 mm x 1.45 mm x 0.5 mm body	Package information	2022-06-01
SOT886_125	XSON6; Reel pack for SMD, 7''; Q3/T4 product orientation	Packing information	2022-12-21
74AVC1T45GM-Q100_Nexperia_Product_Reliability	74AVC1T45GM-Q100 Nexperia Product Reliability	Quality document	2024-06-16
REFLOW_BG-BD-1	Reflow soldering profile	Reflow soldering	2021-04-06
MAR_SOT886	MAR_SOT886 Topmark	Top marking	2013-06-03

支持

如果您需要設計/技術支持，請告知我們并填寫應答表我們會盡快回復您。

模型

文件名稱	標題	類型	日期
avc1t45	74AVC1T45 IBIS model	IBIS model	2016-02-24
SOT886	3D model for products with SOT886 package	Design support	2019-10-03

PCB Symbol, Footprint and 3D Model

Model Name	描述

訂購、定價與供貨

型號	Orderable part number	Ordering code (12NC)	狀態	包裝	Packing Quantity	在線購買
74AVC1T45GM-Q100	74AVC1T45GM-Q100H	935299489125	Active	SOT886_125	5,000	訂單產品

樣品

作為 Nexperia 的客戶，您可以通過我們的銷售機構訂購樣品。

如果您沒有 Nexperia 的直接賬戶，我們的全球和地區分銷商網絡可為您提供 Nexperia 樣品支持。查看官方經銷商列表。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式數據手冊