74ALVCH16501DGG

18-bit universal bus transceiver; 3-state

The 74ALVCH16501 is an 18-bit universal transceiver with bus hold inputs and 3-state outputs. Data flow in each direction is controlled by output enable (OEAB and OEBA), latch enable (LEAB and LEBA), and clock (CPAB and CPBA) inputs. For A-to-B data flow, the device operates in the transparent mode when LEAB is HIGH. When LEAB is LOW, the A data is latched if CPAB is held at a HIGH or LOW logic level. If LEAB is LOW, the A-bus data is stored in the latch/flip-flop on the LOW-to-HIGH transition of CPAB. When OEAB is HIGH, the outputs are active. When OEAB is LOW, the outputs are in the high-impedance state. Data flow for B-to-A is similar to that of A-to-B but uses OEBA, LEBA and CPBA. The output enables are complimentary (OEAB is active HIGH and OEBA is active LOW). This device is fully specified for partial power down applications using I_OFF. The I_OFF circuitry disables the output, preventing the potentially damaging backflow current through the device when it is powered down.

Features and benefits

Wide supply voltage range from 1.2 V to 3.6 V
CMOS low power dissipation
Direct interface with TTL levels
Current drive ±24 mA at V_CC = 3.0 V
Universal bus transceiver with D-type latches and D-type flip-flops capable of operating in transparent, latched or clocked mode
Bus hold on all data inputs
Output drive capability 50 Ω transmission lines at 85 °C
3-state non-inverting outputs for bus-oriented applications
Latch-up performance exceeds 100 mA per JESD78 Class II.A
Complies with JEDEC standards:
- JESD8-7 (1.65 V to 1.95 V)
- JESD8-5 (2.3 V to 2.7 V)
- JESD8C/JESD36 (2.7 V to 3.6 V)
ESD protection:
- HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V
- CDM: ANSI/ESDA/JEDEC JS-002 class C3 exceeds 1000 V
Specified from -40 °C to +85 °C

參數類型

型號	V_CC(A) (V)	V_CC(B) (V)	Logic switching levels	Output drive capability (mA)	t_pd (ns)	Nr of bits	f_max (MHz)	Power dissipation considerations	T_amb (°C)	Package name
74ALVCH16501DGG	n.a.	n.a.	TTL	± 24	2.8	18	150	low	-40~85	TSSOP56

封裝

型號	可訂購的器件編號，（訂購碼(12NC)）	狀態	標示	封裝	外形圖	回流焊/波峰焊	包裝
74ALVCH16501DGG	74ALVCH16501DGG,11 (935262543118)	Active	ALVCH16501	TSSOP56 (SOT364-1)	SOT364-1	SSOP-TSSOP-VSO-WAVE	SOT364-1_118

下表中的所有產品型號均已停產 。

型號	可訂購的器件編號，（訂購碼(12NC)）	狀態	標示	封裝	外形圖	回流焊/波峰焊	包裝
74ALVCH16501DGG	74ALVCH16501DGGY (935262543518)	Discontinued / End-of-life	ALVCH16501	TSSOP56 (SOT364-1)	SOT364-1	SSOP-TSSOP-VSO-WAVE	暫無信息

環境信息

型號	可訂購的器件編號	化學成分	RoHS	RHF指示符
74ALVCH16501DGG	74ALVCH16501DGG,11	74ALVCH16501DGG

下表中的所有產品型號均已停產 。

型號	可訂購的器件編號	化學成分	RoHS	RHF指示符
74ALVCH16501DGG	74ALVCH16501DGGY	74ALVCH16501DGG

品質及可靠性免責聲明

Series

文檔 (8)

文件名稱	標題	類型	日期
74ALVCH16501	18-bit universal bus transceiver; 3-state	Data sheet	2024-07-01
SOT364-1	3D model for products with SOT364-1 package	Design support	2020-01-22
alvch16501	alvch16501 IBIS model	IBIS model	2013-04-08
Nexperia_package_poster	Nexperia package poster	Leaflet	2020-05-15
SOT364-1	plastic, thin shrink small outline package; 56 leads; 0.5 mm pitch; 14 mm x 6.1 mm x 1.2 mm body	Package information	2022-06-23
SOT364-1_118	TSSOP56; Reel pack for SMD, 13"; Q1/T1 product orientation	Packing information	2020-04-21
74ALVCH16501DGG_Nexperia_Product_Reliability	74ALVCH16501DGG Nexperia Product Reliability	Quality document	2024-06-16
SSOP-TSSOP-VSO-WAVE	Footprint for wave soldering	Wave soldering	2009-10-08

支持

如果您需要設計/技術支持，請告知我們并填寫應答表我們會盡快回復您。

模型

文件名稱	標題	類型	日期
alvch16501	alvch16501 IBIS model	IBIS model	2013-04-08
SOT364-1	3D model for products with SOT364-1 package	Design support	2020-01-22

訂購、定價與供貨

型號	Orderable part number	Ordering code (12NC)	狀態	包裝	Packing Quantity	在線購買
74ALVCH16501DGG	74ALVCH16501DGG,11	935262543118	Active	SOT364-1_118	2,000	訂單產品
74ALVCH16501DGG	74ALVCH16501DGGY	935262543518	Discontinued / End-of-life	暫無信息	2,000	訂單產品

樣品

作為 Nexperia 的客戶，您可以通過我們的銷售機構訂購樣品。

如果您沒有 Nexperia 的直接賬戶，我們的全球和地區分銷商網絡可為您提供 Nexperia 樣品支持。查看官方經銷商列表。

How does it work?

The interactive datasheets are based on the Nexperia MOSFET precision electrothermal models. With our interactive datasheets you can simply specify your own conditions interactively. Start by changing the values of the conditions. You can do this by using the sliders in the condition fields. By dragging the sliders you will see how the MOSFET will perform at the new conditions set.

交互式數據手冊