AEC-Q100 qualified for automotive applications

• Specified from-40 °C to 125 °C

Function safety capable

• Provide documents to support function safety design

12-channel precision high-side current output:

• Vbat: 4.5 V to 36 V and Vs: 3.8 V to 36 V

• Up to 100 mA channel current per channel

• 2-bit global, 6-bit independent current setting

• Current accuracy within ±5 % from 18 mA to 100 mA

• Low voltage drops: 600 mV at 100 mA

• 12-bit independent PWM dimming

• Programmable PWM frequency: 50 Hz to 23.4 kHz

• Linear and exponential dimming method

Integrated UART interface:

• Data rate up to 2 Mbit/s

• Support UART data format

• Support 27 slave address set by resister

Diagnostics and protections:

• Programmable Fail-Safe state

• LED open-circuit detection

• LED short-circuit detection

• Single-LED short-circuit diagnostic

• Programmable low-Vs detection

• Open-drain FLT pin for fault indication

• Watchdog and CRC for data line

• MTP ECC check

• 8-bit ADC for pin voltage measurement

• Over-temperature protection

ESD protection:

• HBM: ANSI/ESDA/JEDEC JS-001 class 2 exceeds 2000 V

• CDM: ANSI/ESDA/JEDEC JS-002 class C2a exceeds 500 V

Automotive exterior rear light

Automotive exterior headlight